
Release Notes for XHC MACH3 Ethernet Motion Card

XHC NcEther.dll is the Driver for XHC Ethernet CARD,Used  for MACH3 cnc control system. 
You could control your cnc machine through our Ethernet card.
the card has these feature:
Standard ehternet  Interface
4/6 Axis Step/Direction Output
8 General Purpose Outputs 
16 General Purpose Inputs
1 PWM Output for Spindle Speed Control
Up to 2000Khz Steps pulse

Release Notes: 
2020.12.17  V3.16.3
modify the toolnumber edit to combox.뵶ߺŻĳ˵ѡ񵶺
2020.5.12  V3.16.1
1.probe will up to toolsafez after probe end Ե̧ȫ߶
2.probe distance is extended to 300ms from the safeprobz Ե½г̸Ϊ300MM
3.auto start will not begin when autotool change opinion is manual change. ֶлʱԶG

2020.5.12  V3.16
optimize the communication

2020.3.3  V3.15.9
solve the cannot probe problem.

2020.2.24  V3.15.8
support 16 tools manual  change in the plugin test

2019.8.26 V3.15.7
solve the cannot estop problem when homing
2019.8.26 V3.15.6
 tool cap signal must be conneted when tool change
2019.7.17 V3.15
not to change the new tool dro when changetool return error


2019.2.18 V3.13
support 16 tools

2018.9.30 V3.12
support 12 tools

2018.7.20 V3.11
1.add input4 for manual control output7 for clamp or loose tool 
2.solve the communication overtime result gap problem

2018.1.11 V3.10
modify the communication to asyn

2017.11.6 V3.02
disable output6(roof control) when test too change for t8 
solve "device io error" problem
2016.11.31 V3.01
filter the all input io if all zero
modify the plugin windows output io test ,result device communication problem and reset.

2016.9.21 V3.0
release the first version.
this driver is only used for xhc ehternet card.if you want to use our usb card,we could offer it aslo.



Contact Details:
Chengdu XHC Tech., Inc.
 

86-028-81705368 - Sales,Fax
86-028-81701768  - Support

NetWork:
http://www.cdxhctech.com/

517202913@qq.com Support E-mail
QQ:517202913        Support QQ
 
